Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor
- List PriceUS$44.46piece
- Sale PriceUS$38.92piece
- ShippingFree Shipping
Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current & Voltage Sensor
The Racerstar Shot30A 4in1 ESC 4x30A runs the newest BLHELI_S firmware, supports Dshot/ Multishot/ Oneshot42/ Oneshot125, it offer the best performance in 35x35mm size, integrated current and voltage sensor.
Works up to 30A each motor.
Item name: Shot30A BLHeli_S ESC
Mounting holes: 30.5x30.5mm M3
MCU: BB21, 48Mhz Runs BLHELI_S J_H_xx firmware
Input voltage: 3-6S lipo
Con. Current: 30A
Peak Current: 35A (10S)
BEC: 5V 3A
Integrated Current and Voltage sensor
NO External capacitors needed
Compatible for Omnibus F3 F4, easy to assembly a Fly-tower with it.
BLHeli_S is designed for superior performance in FPV Racing, and uses hardware generated motor pwm for smooth throttle response and silent operation.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us) and D-shot.
The input signal is automatically detected by the ESC upon power up.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tune-able parameters that can make the code run well even in the most demanding situations, although default settings will work.
Excellently in normal operating environments.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
1 x Racerstar Shot30A 4 in 1 ESC
2 x Cable
4 x M3 Nylon screws
8 x M3 Nylon column
4 x M3 Nylon nut